Why Your Washing Machine Won’t Start & How to Get It Going Again

By Fix4U Team
Washing Machine, Laundry Appliances

You’ve got a pile of dirty clothes ready to wash, but when you turn the dial and press start – nothing happens. It’s incredibly frustrating when your washer won’t power on or start a cycle no matter what you try.

The causes can range from blown fuses to defective control boards. By methodically testing components, you can isolate the specific reason your washer won’t start and complete the repair.

In this guide, we’ll cover the most common causes of washing machines failing to start and step-by-step fixes to get your washer running again.

Common Reasons a Washer Won’t Start

When your washing machine completely fails to turn on or start a wash cycle, there are several possible root causes:

Fix4U Repairs' Technicians Fixing  Washing Machine Wont Start Problem In Gta
  • Power supply issues – Problems with the electrical outlet, cord, breaker or internal wiring prevent power from reaching the washer.
  • Defective lid switch – If the lid switch is faulty, the washer thinks the lid is still open and won’t start.
  • Bad control board – When the control board fails, it can’t send voltage to components to begin operation.
  • Faulty door lock – If a front loader’s door will not properly lock closed, the cycle cannot start.
  • Broken start switch – This switch triggers the motor and controls to start functioning when activated.
  • Blown thermal fuse – The thermal fuse trips to prevent fires in overheating conditions. If blown, power is cut.
  • Defective water level switch – The pressure switch must detect proper water fill levels before allowing the start of a cycle.
  • Bad user interface – If membrane buttons or the display fail, desired cycles can’t be started.
  • Seized drive motor – If the motor is seized up, it can’t start the drum spinning when activated.

Troubleshooting a Washer That Won’t Start

To pinpoint the cause of a washing machine not starting, work through key electrical and mechanical components:

  • 1. Confirm power is present: Make sure the machine is plugged in and outlet works. Check breakers and fuses. Verify door is firmly closed.
  • 2. Check control panel: Check for lights or buttons not working properly. If control board is unresponsive, test and replace it.
  • 3. Test lid and door latch switches: Use a multimeter to test switches. If not providing closed circuit when door shut, replace.
  • 4. Assess any error codes: Check for fault codes indicating problems like motor errors or water heating issues.
  • 5. Inspect and reset start switch: Test the push-to-start switch for continuity and proper operation.
  • 6. Examine drive motor: Check motor windings with multimeter. If seized, motor needs replacement.
  • 7. Replace blown thermal fuses: If thermal fuse is open/blown, replace with identical fuse after inspecting for root cause.
  • 8. Inspect water level switch: Check pressure switch and hose for debris. Replace switch if not signaling fill properly.

Getting a Washer to Start Again

Once the specific faulty component is identified, repair is straightforward:

  • Replace defective lid or door latch switches.
  • Swap out bad control boards or user interfaces.
  • Repair or change out malfunctioning start switches.
  • Clear blockages and debris preventing proper water fill.
  • Install new drive motors for seized units.
  • Rectify any loose wiring connections.
  • Reset tripped breakers or replace blown fuses.

With the failed part repaired or replaced, run a quick test cycle. The washer should power on and start washing again.

Preventing Startup Problems

You can minimize startup issues through preventive maintenance:

  • Keep the washer plugged into a dedicated grounded outlet.
  • Clean control panel and keypads regularly to prevent shorts.
  • Replace water inlet screens annually to avoid clogs.
  • Have professionals inspect internal wiring connections periodically.
  • Immediately address any minor electrical or mechanical issues.

With proactive care, many startup failures can be avoided.

Washer won’t start? Call Now To Fix Your Washer !

When to Call an Appliance Repair Technician

For startup issues involving internal components like control boards, switches and motors, relying on a professional technician is recommended.

The pros at Fix4U Repairs have the expertise to:

  • Accurately assess error codes and electrical issues.
  • Test and replace control boards and door latch switches.
  • Inspect drive motors and couplings.
  • Identify causes of seized motors or tripped thermal fuses.
  • Confirm electrical connections are secure.

We quickly get to the bottom of why your washer won’t start and complete the repair. Call (647) 363-5205 for expert diagnosis and repairs when your washer won’t start.

The Cost of Ignoring Startup Problems

While hitting the start button multiple times may seem like a temporary solution, any washer that completely fails to start should be repaired. Allowing startup problems to continue can lead to:

  • Blown fuses and circuit damage from repeated cycling
  • Flooded laundry room if controls fail with water filling
  • Ruined clothes sitting wet for prolonged periods
  • Burn out of motors and controls from repeated strain

Getting the root cause of startup failure identified and fixed promptly reduces risk of further component damage.

Key Takeaways

  • No light, power or control panel response indicates an electrical supply issue.
  • Malfunctioning switches, motors or control boards prevent startup sequence.
  • Methodically test components like door latch and start switches.
  • Replace defective parts like control boards and motors.
  • For internal electrical issues, contact an appliance repair technician for diagnosis.
(647) 363-5205

Fix It with Fix4U Today!
Get A Free Quote Now!

BLOGS

Our latest articles

Fix4U Team
Dishwasher, Kitchen Appliances

Dishwasher Not Draining Properly

Read More
Fix4U Team
Dishwasher, Kitchen Appliances

Dishwasher is Leaking

Read More
Fix4U Team
Dishwasher, Kitchen Appliances

Dishes Come Out Dirty

Read More