Why Is My Washing Machine Filling Up So Slowly? (And How to Fix It)

By Fix4U Team
Washing Machine, Laundry Appliances

Is your washing machine taking forever to fill up with water? Do you find yourself staring at the machine waiting impatiently for it to finish filling, only to realize it’s barely halfway done? A slowly filling washing machine is not only annoying, it can lead to improperly washed laundry and wasted time.

Don’t worry – in most cases, this issue can be fixed with some simple troubleshooting steps. In this blog post, we’ll walk you through the most common reasons a washer may fill slowly, as well as how to diagnose and repair the problem yourself. With the right information, you can get your washing machine filling properly again in no time.

Common Causes of a Slow Filling Washing Machine

There are a few key components that work together to fill your washing machine with water. An issue with any of these can lead to a slow fill. Here are some of the most common culprits:

Fixing Slow Filling Washing Machine Problem By Fix4U Repairs In Gta

Clogged or Damaged Water Inlet Valve

The water inlet valve is responsible for controlling the flow of water into the washing machine. Over time, small particles like grit, dirt and limescale can build up and clog the valve. A clogged valve will restrict water flow, leading to very slow filling.

The valve can also become damaged from normal wear and tear. Things like a bad solenoid, broken diaphragm or warped valve seat could all cause the valve to malfunction and fill water slowly.

Kinked or Clogged Water Supply Hoses

Hard or rubber supply hoses provide the pathway for water to travel from your home’s plumbing system into the washing machine. If the hoses become kinked or bent, this can block water flow through the hose.

Hoses can also become clogged with mineral deposits over time. This causes a narrowing of the hose openings and reduces water volume.

Low Water Pressure

In order for your washing machine to fill properly, your home needs adequate water pressure of 30-120 PSI. Water pressure below 30 PSI may cause very slow filling.

Some common reasons for low water pressure include calcified galvanized pipes, undersized supply pipes, high water usage elsewhere in the home, and issues with the home’s main water shutoff valve or pressure regulator.

Clogged Water Filter

Many washing machines have a water filter to catch debris and sediment entering from the supply hoses. Over time, this filter can become clogged, which blocks water flow.

Refer to your owner’s manual to see if your washing machine has a filter. It may be located at the faucet where the hot and cold supply hoses connect, or along the fill hoses themselves.

Blocked Inlet Screen

Inside the water inlet valve is a small filter screen. Just like the water filter, this can become clogged with sediment over time. A blocked inlet screen will slow down the filling process.

Step-by-Step Diagnosis and Repair

Now that you know what can cause a washing machine to fill slowly, let’s go through a systematic troubleshooting process to diagnose the specific problem with your machine.

Step 1: Check That Water Supply Is Turned Fully On

This may seem obvious, but double check that the shutoff valves for both the hot and cold water lines are fully open. These are usually located behind the washing machine.

Also inspect the supply hoses themselves to make sure there are no kinks obstructing flow. Straighten out any kinked hoses.

Fix4U Repairs' Technicians Fixing Slow Filling Washing Machine Problem In Gta

Step 2: Check Water Pressure

Use a pressure gauge to check the water pressure at the location where the washer’s supply hoses connect. As mentioned before, you need at least 30 PSI for proper filling.

If the pressure reads lower, there’s likely a whole-house water pressure issue that needs addressing. This may require the help of a plumber.

Step 3: Clean Out the Water Inlet Screens

Your washing machine has two inlet screens – one is located inside the inlet valve itself, the other may be within an external filter.

To clean out the inlet valve screen:

  • Turn off power to washing machine
  • Turn off the water supply taps
  • Disconnect the hoses from the back of the washer
  • Locate the inlet valve – it will have a cold and hot water inlet
  • Unscrew the inlet screens from the valve housing
  • Remove any debris clogging the screen mesh
  • Use a toothbrush and water to clean out the screens
  • Replace the screens and reconnect hoses

To clean an external filter:

  • Locate the filter along the fill hoses or where they connect to faucet
  • Unscrew the filter housing and remove filter
  • Rinse filter under water to flush out any sediment
  • Replace filter and filter housing

Turn water back on and test. Filters blocked with debris are a very common cause of slow filling.

Step 4: Check the Water Inlet Valve

If cleaning the inlet screens did not solve the problem, the issue likely lies with the inlet valve itself. To check the valve:

  • Turn off power and water supply
  • Disconnect hoses from the back of washer
  • Unscrew the inlet valve from the back of the machine
  • Visually inspect the valve for damage like cracks or leaks
  • Use a multimeter to test the electrical solenoid coils for proper resistance
  • Check that diaphragm and/or plunger move freely when activated
  • Make sure valve seat is clear of debris and mineral buildup

If the valve is damaged or fails any of these checks, replacement of the inlet valve is needed. Make sure to get the correct replacement part number for your washing machine make and model. Installation is reverse of removal.

Step 5: Check and Replace Fill Hoses

Another possibility is that the fill hoses themselves are blocked. Unscrew the hoses from the back of the washer and inspect them for kinks, cracks and obstructions.

Run water through the hoses and into a bucket – if flow seems slow, it’s best to replace the old hoses. When installing new hoses, make sure they are the correct length for your setup.

Step 6: Contact a Technician

If you’ve worked through all of these troubleshooting steps but your washer still fills slowly, it’s time to call a professional repair technician. There may be an issue with the washer’s control board not opening the inlet valve fully, or a leak somewhere in the internal plumbing.

A technician will have the skills and tools to fully diagnose the washer and identify any necessary repairs. They can also check that the washer is draining properly, as a slow drain can sometimes mimic the effects of slow fill.

Preventing Slow Filling Washing Machine Problems

After fixing your washing machine’s filling issues, there are some maintenance steps you can take to prevent slow fills from happening again:

  • Periodically inspect and clean inlet valve screens and external filters
  • Replace old fill hoses every 5 years
  • Use a water softener if you have hard water
  • Have a plumber check your home’s water pressure/pipes if pressure seems low
  • Verify washing machine is level for proper draining
  • Use a washing machine cleaner monthly to remove residue
  • Follow all maintenance recommendations in your owner’s manual

Taking preventative action will help keep your washer’s water supply functioning properly for years to come.

Facing similar issues? Call Now and Fix your Washer!

When to Call a Professional for Your Slow Filling Washer

While many slow fill issues can be addressed with DIY troubleshooting, there are some cases where a trained repair technician is needed:

  • If the inlet valve requires replacement
  • For internal washing machine leaks or drain problems
  • If error codes show an electrical control failure
  • When mineral scale requires descaling of internal components
  • For low water pressure/pipe issues within the home
  • If troubleshooting does not isolate the cause

Washing machine repair technicians have specialized tools, parts, and the expertise to fully diagnose tricky filling problems. They can also determine whether a certain part needs to be repaired versus replaced.

The technicians at Fix4U Repairs are highly experienced with washing machine repair and service. Our team services the GTA area and we offer a Price Match Guarantee on all our repairs. Give us a call at (647) 363-5205 if your washer is filling up water slowly – we’re happy to help get your appliance functioning optimally again

(647) 363-5205

Fix It with Fix4U Today!
Get A Free Quote Now!

BLOGS

Our latest articles

Fix4U Team
Dishwasher, Kitchen Appliances

Dishwasher Not Draining Properly

Read More
Fix4U Team
Dishwasher, Kitchen Appliances

Dishwasher is Leaking

Read More
Fix4U Team
Dishwasher, Kitchen Appliances

Dishes Come Out Dirty

Read More